|
What does Reveal Inspect during a Home Inspection in Clarksville, TN?
In Clarksville, Tennessee, and everywhere else, Home Inspections are a valuable tool in every aspect of Real Estate. Every high quality home inspection performed by Reveal adheres to the Standards of Practice of the American Society of Home Inspectors and takes around 4 hours to complete. Reveal also offers additional inspection services such as Radon Testing and Pool or Spa Inspection to ensure you and your family are as safe as possible. Take advantage of these services so you can lessen your chance of finding more problems later on. Exterior Inspection Power strip used as permanant exterior outlets
The first part of our Home Inspection is the exterior. We examine the exterior twice. First, we look close at the details and next we step back and look at the big picture. We evaluate siding materials, driveways, porches and decks. We check doors and windows, exterior outlets, and operate hose bibs. We also check water pressure and determine if you have backflow prevention devices on your spigots. We check the slope of window sills. We look at your vegetation to make sure it isn't too close to your home. We look at the slope of your yard and any areas that could be a concern for moisture intrusion. We inspect the gutters and downspouts. We look at your heating and cooling units and decks for safety.
 Damaged Roof decking and shingles A home inspection in Clarksville by companies other than Reveal doesn't always include walking on roofs. However, Reveal will access your roof everytime if it is safe. We look at the materials of the roof, the condition of the shingles, and any areas that could be a source of water damage. We carefully inspect flashings and roof penetrations because these are common areas of leakage. Also, we look for ponding in your gutters, which indicates improper slope.
The next part of the inspection is the inside. We operate light switchs and smoke detectors during the inspection. We inspect every door and open drawers and cabinets. We operate windows and electrical outlets. We operate plumbing fixtures and will run lots of water. This helps to identify leaks during the inspection. We look for loose faucets and other improper plumbing techniques,  Dripping water supply to sink In the tubs and showers we ensure the shower head doesn't leak and the tub faucet doesn't run while the shower is on. If there is a whirlpool tub we operate that system and inspect the pump for GFCI protection. Also, we ensure the bathroom and kitchen outlets are GFCI protected as well. We look at the toilet components and look for loose or cracked toilets and possible leaks. In the kitchen, we make sure the microwave, oven, and dishwasher are securely mounted in place. We'll turn on the oven and range to make sure all elements heat up. We look to ensure that your dishwasher has a vacuum break. We operate the garbage disposal in the sink. We look at the washer and dryer connections as well. We operate gas fireplaces and report the temperature at your supply and return for your heating or cooling system. In the garage, we inspect the water heater, electrical panel, and garage doors.
 Leak in roof/bathroom vent stops in attic We next enter the attic and look at the roofing construction, materials, size and spacing of roof framing, insulation type and amount, A/C or heating units, vents, and roof penetrations. During this part of the inspection, we mainly look for poor construction practices, leaks, and other areas of concern. A common problem we find in new construction in Clarksville is bathroom vents that aren't vented to the outside. We pay extra attention to this during our inspection.
Crawlspace Inspection Leaking temporary plumbing repair Finally, the fun part of the inspection! The inspector enters all accessible areas of the crawlspace and looks at the foundation for signs of movement and water penetration. Reveal also looks for anchor bolts, the size and spacing of the floor construction, plumbing leaks, falling insulation, evidence of water penetration, and poor construction practices. We look at the plumbing pipes and heating/cooling ductwork for problems. During the inspection, we take lots of pictures and include up to 100 in the report. After the inspection is complete, we return to the office and work on the report for at least 2 hours. This allows us to ensure that we give you the most accurate and fact-filled report possible. We know firsthand how disappointing it is to pay for an inspection and to receive an inferior product. That is why we try to put ourselves in your shoes and to give you the quality inspection that we would want to receive. Our goal is not only to meet your expectations, but to exceed them - everytime. Once the inspection report is complete we will email you a link. You will receive this within 24 hours of us completing the inspection. If you want more information about our inspection, please call us at any time. We are available 7 days a week for your convenience. 931-542-2665   |